|
 |
Power Crane
The Power Crane is designed to work on the 3-point
linkage of agricultural tractors of 60+ HP. Its main
application is for lifting bags of fertiliser or meal up
to half-tonne weight. It comes complete with
brackets to attach a fertiliser spreader. With this
in place, the large bags can easily be manoeuvred from a
trailer over the spreader to dispense its load. This
system eliminates the need for a second tractor to load
the spreader.
Features:
-
Very robust construction using strong
rolled hollow section throughout;
-
Hydraulic lift and extension of the jib;
-
Hose anti-burst valves for safe
operation. In the event of a hose bursting whilst a ram is
extended, it will be prevented from collapsing by the valve which
shuts off the rapid expulsion of the oil;
-
Extendible legs which add to its
stability on lighter tractors;
-
Workload
is a half-tonne to
a distance of 2.7m behind the mast, or a
maximum height of 4.7m.
It can lift a maximum of 1 tonne unextended which is 1.6m out and 3.7m high;
-
Direct connection to dual double acting
services;
-
Mounting brackets and top link to suit
the fertiliser spreader;
-
Paint finish is rut inhibiting primer
over-coated with gloss enamel.
Options:
-
 Valve
chest for tractors with only one single acting service such as trailer
tipping so only a supply and return connection are required;
-
Hook chain - to suspend the hood so it
is near the ground for low bags - 500mm or 1m.
-
Lifting sling - webbed sling 2m long
with a 1 tonne lifting capacity - for lifting the low big bags.
Weight of crane: 400 kg |
 |
